skip to main text

Inside View

View from the front of the printer. When the top cover (A) on the top of the printer is opened, the ink tank covers (B) to the left and right hand sides are visible. Open the ink tank covers to access the tank caps (C). On the ink tanks (D) visible on the front of the printer are the upper limit line (E), the single dot (F), and the lower limit line (G). Inside the printer in the middle is the ink valve (H).
A: Top Cover
Open to refill ink tanks and to remove jammed paper.
B: Ink Tank Covers
Open to refill ink tanks.
C: Tank Caps
Open to refill ink tanks.
D: Ink Tanks

The black ink tank is on the left, and the color ink tanks (cyan, magenta, and yellow) are on the right.

If any ink levels are low, refill the low tanks.

E: Upper Limit Line
Indicates the maximum capacity of the ink.
F: Single Dot
Indicates the amount of ink required when performing ink flush.
G: Lower Limit Line
Indicates the lower limit of the sufficient amount of ink to print. Refill the ink tank before the amount of ink is below this line.
H: Ink Valve Lever

Operate when transporting a printer.

I: Print Head Holder
The print head is pre-installed.